1000 系列 平推逃生門鎖 Exit Devices

  • 1000 系列 平推逃生門鎖 Exit Devices

1000 系列 平推逃生門鎖 Exit Devices

品牌: klacci 商品規格:
型號: 1000 價格: 0


1000 Series Exit Devices



       


1000 Series Exit Devices and Trims are designed for new or retrofit installation into other manufacturers' devices. Push Bar assembly's smooth and reduced projection minimizes catch hazard. Device function is field selectable by adaptation with selected type of trim. A full complement of lever trim is available in wide range of architectural finishes. 1000 Series are made to comply with the highest safety and security standards in industry. Devices and trims are UL/cUL listed for Panic Hardware or Fire Hardware. They are certified to ANSI/UL305 and ANSI/BHMA A156.3 Grade 1. 1000 Series provides superior durability for high impact applications such as offices, schools, banks, assisted living facilities and other institutions or commercial buildings.



       


 
       



       


Classroom Security Solutions



       


       



       


Nowadays, parents major concern regarding their children's education is not only how much they are learning, but also how safe they are.



       


With Klacci's Classroom Security Solutions, school facilities can now provide a safe and secure environment, where unauthorized individuals are denied entry while students and staff are always free to exit in the case of an emergency. With Klacci, a safe learning environment is no longer a concern to worry about.



       


Students' education is school's responsibility. Their safety, is ours.         



       


The 1000 Series Exit Devices are fabricated and blended with simplicity,
strength, durability, aesthetics and installer-friendly innovations.        



       


  • Devices and trims are designed for new or retrofit installation into other manufacturers' exit devices and trims.

  • Made to comply with the highest safety and security standards in industry.

  • UL/cUL listed for panic hardware or 3-hour fire rated exit hardware.

  • Certified to ANSI/UL305 and ANSI/BHMA A156.3 Grade 1.



       


1000_Features_01       



       


A Simple cylinder built in add-on kit.



       


B Special plastic inserts and rubber bumpers reduce noise and don’t fail under high or low temperatures. Impervious to petroleum lubricants.



       


C Detachable center case allows switching between mechanical and electrical options which replaces the need of buying two complete sets.



       


D Replaceable cam breaks at a predetermined load to prevent further damage of the trim mechanism. Handing change is simple and easy, just remove screw and cam from mechanism and rotate lever to desired position, then replace cam and fasten the screw.



       


E Stainless steel latch and deadlatching blade add perceived value.



       


F Center Case with maximum versatility, Surface and Concealed Vertical Rods can be adjusted inside the center case with an ingenious rod holder design.



       


G Double Cylinder devices are used as classroom intruder locks, allowing the locking of the outside trim without opening the door.



       


H Integrated End Cap and pivot add push pad stability and make the bar move smoothly regardless of where the pressure is applied on push pad.



       


I Push Bar is smoothly surfaced. Reduced projection minimizes catch hazard.



       


J Dogging can be done with an allen wrench, a small flat key or a flat blade screwdriver.



       


K Flush End Cap design.



Read More about “1000 Series” …        



 

一德金屬 Klacci

2015/09/11 發佈於:消防安全
訪客請先登入
Share
Share
Tweet
Pin
Share
Share
Email